Space Heating, Hot Water and Cooling-All in One Unit: R290 Household Heat Pump

In modern life, every household installs multiple appliances: for heating, a boiler or a heat pump is needed; for cooling in summer, an air conditioner is added; for hot water for bathing and washing dishes, a water heater is hung. Three appliances, three installation costs, three areas of occupation. Is there a single machine that can do all these things? Yes - the tri-generation household heat pump. In the past two years, more and more families have installed it.

Tri-generation, simply put, is one air source heat pump that simultaneously provides heating, cooling and domestic hot water. In winter for heating, in summer for cooling as an air conditioner, and then a separate path of heat is sent to the water tank to heat the water. All hot water throughout the year does not require additional money for heating. Just this one logic combines the three systems into one.

Our household heat pump uses R290 as the refrigerant. R290 is a natural medium with a greenhouse effect potential of only 3, less than even a fraction of traditional refrigerants. In Europe, regulations have become increasingly strict in recent years, and R290 is basically the industry's recognized main direction.

This heat pump has many advantages.

Energy efficiency is a hard metric. The household heat pump reaches the EU A+++ energy efficiency level. In low-temperature floor heating conditions, the energy efficiency ratio can exceed 5, meaning that 1KWH of electricity can generate up to 5KWH of heat. This is more cost-effective than using an electric water heater or gas for hot water. It can also withstand freezing temperatures. This household heat pump can still stabilize heating in an environment of -25℃. In Nordic and Central European mountainous areas, temperatures below zero degrees Celsius are normal during winter, and this heat pump can operate stably in such extreme weather to provide winter heating.

Quiet, easy installation. This household heat pump operates with the lowest noise level of around 43 decibels (varies by model), completely not affecting the user's daily life. Installation is also very simple, and there is basically no maintenance required in the future.

There is also an implicit advantage: this household heat pump has the SG-Ready function, which can "communicate" with the power grid and cooperate with the photovoltaic system. During the day when there is more photovoltaic power generation, it will prioritize heating the water and store it. It is particularly suitable for use with PVT solar panels and can greatly save electricity costs.

This household heat pump is a small unit, so it is very suitable for home use; for small shops and other places where there is no room to install a large unit, it is also its strong point. Add a water tank, and there will always be hot water for the whole family. The water temperature can be set as needed, up to 75℃.

If your home is being renovated or you want to replace the heating system in an old house, this household heat pump is worth considering. One heat pump with three functions, not only saving equipment costs, but also more worry-free. If you want detailed parameters or selection suggestions, please feel free to come and chat with us at any time.